R&S Erection of Concord > Commercial Doors > Rolling Steel Doors

Rolling Steel Doors

R&S Rolling Steel Doors

R&S is a leading manufacturer of rolling steel service doors. Many different models are available to fit your needs. Our doors are made to stand up to daily use and to provide many years of reliable service.

Rolling Steel Doors Rolling Steel Doors2

Heavy Duty Steel Rolling Service Doors

The R&S Heavy Service Duty door provides high security and durability offering years of maintenance free performance. Many options are offered with this model from perforated slat to the inclusion of a pass door or grille section.

All R&S doors are designed to withstand up to 80 mph winds and can be upgraded for more severe weather conditions. Curtains can be ordered in standard grey or in tan with contrasting black guides and foot piece.

Features:

  • 6″ minimum diameter structural steel pipe barrel
  • Oil tempered torsion springs on continuous cold-rolled steel shaft
  • Steel plate brackets attach to wall angles
  • Interior or exterior, face of wall or between jamb mount
  • Prime-painted 24 gauge galvanized steel hood
  • Chain operation with cast iron gears
  • 22 gauge Interlocking prime-painted galvanized steel slats-(heavier gauges available)
  • structural steel angle guides and continuous wall angle mounting
  • Extruded aluminum foot piece with astragal

Click here for brochure

 


 

Standard Duty Service Door

The R&S Standard Duty door is an economical yet reliable service door affording many years of maintenance free performance. Many options are offered from perforated slat to the inclusion of a pass door or grille section. Please see the many options available and if there is need for higher cycle performance, greater wind resistance or increased security, please see our Heavy Duty Steel Service Door page below.

Features:

  • steel channel guides
  • 24 gauge interlocking prime painted galvanized steel slat curtain up to 16′ wide-22 gauge over 16 ‘ wide (heavier gauges available)
  • 24 gauge hood standard – upgrades of gauge available
  • 6″ minimum diameter structural steel pipe barrel
  • Oil tempered torsion springs on continuous cold-rolled steel shaft
  • Steel plate brackets attach to wall angles
  • Interior or exterior, face of wall or between jamb mount
  • Prime-painted galvanized steel hood
  • Chain operation with cast iron gears
  • Interlocking prime-painted galvanized steel slats
  • Extruded aluminum foot piece with astragal

 


 

“Climate Guard” Weather stripped Service Doors

When an application requires protection against the elements the “Climate-Guard” service door is the solution. Rain, dust and wind are kept at bay by vinyl weather stripping at the foot piece, guides and hood. Designed for sizes up to 30′ wide and 30′ high these doors are constructed to weather the storm and provide years of worry free service.

 


 

“Thermal Guard” Insulated Service Doors

When an application requires protection against the elements the “Climate-Guard” service door is the solution. Rain, dust and wind are kept at bay by vinyl weather stripping at the foot piece, guides and hood. Designed for sizes up to 30′ wide and 30′ high these doors are constructed to weather the storm and provide years of worry free service.

All R&S doors are designed to withstand up to 80 mph winds and can be upgraded for more severe weather conditions. Curtains can be ordered in standard grey or in tan with contrasting black guides and foot piece. A galvanized steel finish is also offered providing the look and protection of stainless steel without the cost.

Click here for brochure

Slat Options:

Type 30 Large Curved Slat

Type 30 Large Curved Slat

Standard curved slat for use on all service doors where strength and durability are a consideration. Available in 24, 22, 20, or 18 gage galvanized steel. Also for use on all fire doors.


Type 20 Small Curved Slat

Type 20 Small Curved Slat

Optional curved slat for use on service doors to 16′ wide. Available in 22 or 20 gage galvanized steel. Also for use in fire doors to 15′ wide.


Type 25 Large Flat Slat

Type 25 Large Flat Slat

Standard flat slat for use on all service doors where environmental conditions are a consideration. Available in 24, 22, 20, or 18 gage galvanized steel. Also for use on all fire doors, especially those requiring gasketing.


Type 18 Small Flat Slat

Type 18 Small Flat Slat

Optional flat slat for use on service doors to 16′ wide. Available in 22 or 20 gage galvanized steel or 22 gage stainless steel. Also for use on fire doors to 15′ wide, counter fire doors and counter doors.


Type 24ET Aluminum Extruded Slat

Type 24ET Aluminum Extruded Slat

Optional thick-line, 11 gage extruded aluminum slat for exceptional corrosion resistance, durability, strength, and beauty. Available in standard mill finish or optional anodized clear or bronze for architectural needs.


Type 24ES Aluminum Extruded Slat

Type 24ES Aluminum Extruded Slat

Optional slim-line, 15 gage extruded aluminum slat for exceptional corrosion resistance, durability, and beauty. Lightweight design for use on service doors up to 16; wide. Available in standard mill finish or optional anodized clear or bronze for architectural needs.

R&S Erection of Concord, CA

2424 Bates Ave. Concord , CA 94520
(925) 671-7606 Fax: (925) 671-7621
License # 667038

CALL US TODAY!

925-671-7606

Special Offer! Premium LiftMaster Opener Installed Only $400  Get Yours!